Med Instr Tech - Anesthia
Major Duties included but are not limited to:
Calibration, maintenance, operation, and troubleshooting of a broad spectrum of diagnostic and therapeutic medical instruments and equipment. Many equipment systems consist of complex integrated computer controls with multiple interconnected subsystems. Requires knowledge, judgment and creativity to adapt and integrate equipment to new or difficult procedures or settings (i.e., ability to modify a blood pressure manometer to measure CPAP in one lung ventilation). Jointly develops routine maintenance and repair schedules based on regulatory standards, manufacturer recommendations and equipment requirements. Services anesthesia equipment within level of expertise, performing preventative maintenance, evaluating and replacing worn or failed components and assemblies as needed. Requires familiarity with equipment under service contract and warranty. Must understand the equipment parameters and limitations, procedure objectives and provide appropriate equipment and assistance as needed to optimize the situation and verify accurate results. Ensures drugs and emergency equipment are available; sets up, calibrates and troubleshoots ventilators and all routine monitors; assists in preparation of IV solutions, medication infusion equipment, invasive monitor fluid lines and transducers; performs blood test analysis; and assists in monitoring patient vital signs and lab results as ordered by the anesthesia provider. Assists in many intense complicated procedures including controlled and emergent airway management, establishing and maintaining invasive monitoring, various medication infusion systems, positioning and transport of unstable patients. Recognizes abnormalities in patient responses to treatment, lab results or equipment function. Notifies team and troubleshoots cause of erroneous result. Knowledge of pharmacology including the classification and administration of anesthetic agents. Works safely with hazardous materials (Cidehol 70, enzymatic detergents and bleach) using all safety equipment and procedures set forth by governing agencies protecting self and others. Provides guidance, orientation and training in the proper use and maintenance of equipment and instruments. Assists in collection and documentation of all necessary statistics and quality control data as per VAPA policy, OSHA, JCAHO, and the American Pathologists. Must be proficient with the following equipment:
? GE ventilators? Philips monitoring systems? ROTEM- Rotational thromboelastogram? Sorin Cell Saver? Ultrasound equipment to include Transesophageal Echocardiography? Point of Care testing with Abbott iStat-Activated Clotting time andAccucheck glucometers? Belmont Rapid infusing systems? Video Laryngoscopes to include Glidescope and Storz? Difficult Airway adjuncts to include bronchoscopyWork Schedule:
0900-1830 may vary depending on service needsFinancial Disclosure Report:
Not required Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met. Basic Requirements:
United States Citizenship:
Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. Licensure or Certification. Licensure or Certification is not required for this occupation; however, it is strongly desirable at GS-6 or above as evidence of possession of the essential knowledge, skills, and abilities. For certain functional areas at the higher levels or supervisory assignments, specific certifications appropriate to the specialty are indicated in this standard under Titles and Certification/Registrations. Anesthesia Technicians perform logistical and technical support to anesthesiologists and nurse anesthetists. They maintain anesthesiology supplies and equipment, set-up anesthetizing locations and operate, monitor, and collect data from anesthesia related equipment. In some cases Anesthesia Technicians will perform clinical laboratory functions, equipment preventive maintenance/repair, and specialized cardiac procedures such as cardiac output measurement, intra-aortic balloon pumping, vessel cannulation, and autotransfusion services. Certification at two distinct levels is offered by the American Society of Anesthesia Technologists and Technicians (ASATT). Preferred
Experience:
Certification by the American Society of Anesthesia Technologists and Technicians (ASATT) preferred, but not required. Two or more years' experience as an Anesthesia Technician. Current Basic Cardiac Life Support (BCLS) certification Grade Determinations:
GS-6 Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the positions to be filled. In addition, the candidate must demonstrate the following KSAs:
Demonstrated Knowledge, Skills and Abilities 1. Knowledge of human anatomy and physiology (specifically cardiac and pulmonary). 2. Knowledge and application of safety and infection control processes. 3. Ability to serve as a circulating technician for supplies and to assist with documentation of hemodynamic patient data. 4. Knowledge of anesthesiology supplies and equipment appropriate to less complex anesthetic procedures, such as those found in Ambulatory Surgery. Certification. No certification is required; however, it is desirable that employees at this level have Basic Cardiac Life Support (BCLS) certification. GS-7 Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the positions to be filled. In addition, the candidate must demonstrate the following KSAs:
Demonstrated Knowledge, Skills and Abilities 1. Knowledge of the fundamentals of standard equipment operation, calibration and function. 2. Knowledge of correct use of non-invasive patient monitoring equipment specific to anesthesiology. 3. Ability to appropriately interact with patients during anesthetic procedures. 4. Knowledge of anesthesiology supplies and equipment appropriate to routine anesthetic procedures, such as those found in typical inpatient settings. Certification. No certification is required; however, it is desirable that employees at this level have Basic Cardiac Life Support (BCLS) certification. GS-8 Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the positions to be filled. In addition, the candidate must demonstrate the following KSAs:
Demonstrated Knowledge, Skills and Abilities 1. Knowledge of the correct use of invasive patient monitoring equipment specific to anesthesiology. 2. Knowledge of basic electrocardiography (EKG). 3. Skill and ability to troubleshoot equipment, often while the patient is anesthetized. 4. Skill and ability to maintain sterility during procedures. 5. Knowledge and understanding of arterial pressure line wave forms including the ability to recognize and distinguish normal from abnormal, artifact from abnormality, and forewarn the physician or anesthetist of an impending life-threatening situation. 6. Knowledge of anesthesiology supplies, medications, and equipment appropriate to more difficult anesthetic procedures such as those found in inpatient settings with more acutely ill patients. Certification. No certification is required; however, it is desirable that employees at this level have Basic Cardiac Life Support (BCLS) certification. References:
VA Handbook 5005, Part II, Appendix G27 Medical Instrument Technician (Anesthesia) Qualification Standards, GS-0649 The full performance level of this vacancy is GS8. The actual grade at which an applicant may be selected for this vacancy is in the range of GS8 to GS8. Physical Requirements:
This position involves walking, frequent bending, reaching and stretching to assemble, set up and take apart equipment. The incumbent also carries, pulls, and pushes moderately heavy objects, such as equipment and supplies. Above average dexterity is required.
Estimated Salary: $20 to $28 per hour based on qualifications.
Calibration, maintenance, operation, and troubleshooting of a broad spectrum of diagnostic and therapeutic medical instruments and equipment. Many equipment systems consist of complex integrated computer controls with multiple interconnected subsystems. Requires knowledge, judgment and creativity to adapt and integrate equipment to new or difficult procedures or settings (i.e., ability to modify a blood pressure manometer to measure CPAP in one lung ventilation). Jointly develops routine maintenance and repair schedules based on regulatory standards, manufacturer recommendations and equipment requirements. Services anesthesia equipment within level of expertise, performing preventative maintenance, evaluating and replacing worn or failed components and assemblies as needed. Requires familiarity with equipment under service contract and warranty. Must understand the equipment parameters and limitations, procedure objectives and provide appropriate equipment and assistance as needed to optimize the situation and verify accurate results. Ensures drugs and emergency equipment are available; sets up, calibrates and troubleshoots ventilators and all routine monitors; assists in preparation of IV solutions, medication infusion equipment, invasive monitor fluid lines and transducers; performs blood test analysis; and assists in monitoring patient vital signs and lab results as ordered by the anesthesia provider. Assists in many intense complicated procedures including controlled and emergent airway management, establishing and maintaining invasive monitoring, various medication infusion systems, positioning and transport of unstable patients. Recognizes abnormalities in patient responses to treatment, lab results or equipment function. Notifies team and troubleshoots cause of erroneous result. Knowledge of pharmacology including the classification and administration of anesthetic agents. Works safely with hazardous materials (Cidehol 70, enzymatic detergents and bleach) using all safety equipment and procedures set forth by governing agencies protecting self and others. Provides guidance, orientation and training in the proper use and maintenance of equipment and instruments. Assists in collection and documentation of all necessary statistics and quality control data as per VAPA policy, OSHA, JCAHO, and the American Pathologists. Must be proficient with the following equipment:
? GE ventilators? Philips monitoring systems? ROTEM- Rotational thromboelastogram? Sorin Cell Saver? Ultrasound equipment to include Transesophageal Echocardiography? Point of Care testing with Abbott iStat-Activated Clotting time andAccucheck glucometers? Belmont Rapid infusing systems? Video Laryngoscopes to include Glidescope and Storz? Difficult Airway adjuncts to include bronchoscopyWork Schedule:
0900-1830 may vary depending on service needsFinancial Disclosure Report:
Not required Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met. Basic Requirements:
United States Citizenship:
Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. Licensure or Certification. Licensure or Certification is not required for this occupation; however, it is strongly desirable at GS-6 or above as evidence of possession of the essential knowledge, skills, and abilities. For certain functional areas at the higher levels or supervisory assignments, specific certifications appropriate to the specialty are indicated in this standard under Titles and Certification/Registrations. Anesthesia Technicians perform logistical and technical support to anesthesiologists and nurse anesthetists. They maintain anesthesiology supplies and equipment, set-up anesthetizing locations and operate, monitor, and collect data from anesthesia related equipment. In some cases Anesthesia Technicians will perform clinical laboratory functions, equipment preventive maintenance/repair, and specialized cardiac procedures such as cardiac output measurement, intra-aortic balloon pumping, vessel cannulation, and autotransfusion services. Certification at two distinct levels is offered by the American Society of Anesthesia Technologists and Technicians (ASATT). Preferred
Experience:
Certification by the American Society of Anesthesia Technologists and Technicians (ASATT) preferred, but not required. Two or more years' experience as an Anesthesia Technician. Current Basic Cardiac Life Support (BCLS) certification Grade Determinations:
GS-6 Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the positions to be filled. In addition, the candidate must demonstrate the following KSAs:
Demonstrated Knowledge, Skills and Abilities 1. Knowledge of human anatomy and physiology (specifically cardiac and pulmonary). 2. Knowledge and application of safety and infection control processes. 3. Ability to serve as a circulating technician for supplies and to assist with documentation of hemodynamic patient data. 4. Knowledge of anesthesiology supplies and equipment appropriate to less complex anesthetic procedures, such as those found in Ambulatory Surgery. Certification. No certification is required; however, it is desirable that employees at this level have Basic Cardiac Life Support (BCLS) certification. GS-7 Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the positions to be filled. In addition, the candidate must demonstrate the following KSAs:
Demonstrated Knowledge, Skills and Abilities 1. Knowledge of the fundamentals of standard equipment operation, calibration and function. 2. Knowledge of correct use of non-invasive patient monitoring equipment specific to anesthesiology. 3. Ability to appropriately interact with patients during anesthetic procedures. 4. Knowledge of anesthesiology supplies and equipment appropriate to routine anesthetic procedures, such as those found in typical inpatient settings. Certification. No certification is required; however, it is desirable that employees at this level have Basic Cardiac Life Support (BCLS) certification. GS-8 Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the positions to be filled. In addition, the candidate must demonstrate the following KSAs:
Demonstrated Knowledge, Skills and Abilities 1. Knowledge of the correct use of invasive patient monitoring equipment specific to anesthesiology. 2. Knowledge of basic electrocardiography (EKG). 3. Skill and ability to troubleshoot equipment, often while the patient is anesthetized. 4. Skill and ability to maintain sterility during procedures. 5. Knowledge and understanding of arterial pressure line wave forms including the ability to recognize and distinguish normal from abnormal, artifact from abnormality, and forewarn the physician or anesthetist of an impending life-threatening situation. 6. Knowledge of anesthesiology supplies, medications, and equipment appropriate to more difficult anesthetic procedures such as those found in inpatient settings with more acutely ill patients. Certification. No certification is required; however, it is desirable that employees at this level have Basic Cardiac Life Support (BCLS) certification. References:
VA Handbook 5005, Part II, Appendix G27 Medical Instrument Technician (Anesthesia) Qualification Standards, GS-0649 The full performance level of this vacancy is GS8. The actual grade at which an applicant may be selected for this vacancy is in the range of GS8 to GS8. Physical Requirements:
This position involves walking, frequent bending, reaching and stretching to assemble, set up and take apart equipment. The incumbent also carries, pulls, and pushes moderately heavy objects, such as equipment and supplies. Above average dexterity is required.
- Department:
0649 Medical Instrument Technician - Salary Range:
$49,324 to $64,121 per year
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
